WRI®

PS 3410

A well-proven 34x7 construction provides good flexibility multi-strand spin resistance allows for smoother in-service operation, reduced rope torque, and less movement in the shaft.

A specialized Line Contact Design (LCD) improves performance and reduces internal cross cutting damage, common to other multi-strand products. By combining outer langs-lay strands with inner regular lay strands, the underside of the outer strand wires run in the same direction as the wires of the supporting layer. A specially manufactured core improves rope performance by reducing stretch, providing a more consistent density and diameter to support the strands, resisting strand abrasion, and eliminating core rot caused by corrosive environments.

Looking for a quote or more info?

Applications

Friction Hoist
Drum Hoist
Balance
Shaft Sinking

Advantages

Good flexibility
Reduced torque

Downloads

Underground Mining Catalogue

Features

Compaction Dyform

Core IWRC

Steel Grades 1770, 1960 or 2160

Lay type Langs lay or Regular lay

Lay Direction RH or LH

Finish Bright or Galvanised

WRI® PS 3410 Shaft Sinking specification

^{Note for more detailed information please download the brochure above.}

DIAMETER		APPROX. WEIGHT		MINIMUM BREAKING LOAD
DIAMETER		APPROX. WEIGHT		115 LTSI / 1770 MPa		125 LTSI / 1960 MPa		133 LTSI / 2060 MPa
inches	mm	lb/ft	kg/m	lbf	kN	lbf	kN	lbf	kN
1	25	1.8	2.7	88,400	393	96,200	428	105,000	467
1 1/8	28	2.4	3.5	116,000	516	126,000	560	135,200	601
1 1/4	32	2.8	4.2	141,400	629	153,400	682	163,200	726
1 3/8	35	3.4	5.1	167,200	744	182,200	810	193,400	860
1 1/2	38	4.1	6.0	199,000	885	216,000	961	230,000	1023
1 5/8	42	4.8	7.1	234,000	1041	254,000	1130	270,000	1201
1 3/4	44	5.5	8.2	274,000	1219	298,000	1326	314,000	1397
1 7/8	48	6.3	9.4	314,000	1397	340,000	1512	364,000	1619
2	50	7.2	10.7	368,000	1637	398,000	1770	422,000	1877
2 1/8	54	8.1	12.1	414,000	1842	448,000	1993	476,000	2117
2 1/4	57	9.1	13.6	464,000	2064	500,000	2224	530,000	2358
2 3/8	60	10.2	15.1	516,000	2295	556,000	2473	590,000	2625
2 1/2	64	11.3	16.8	570,000	2536	616,000	2740	654,000	2909

^{This table is for guidance purpose only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bekaert.}

WRI® PS 3410 Balance Ropes specification

^{Note for more detailed information please download the brochure above.}

DIAMETER		APPROX. WEIGHT		MINIMUM BREAKING LOAD
DIAMETER		APPROX. WEIGHT		100 LTSI / 1570 MPa
inches	mm	lb/ft	kg/m	lbf	kN
1	25	1.7	2.5	68,000	302
1 1/8	28	2.1	3.1	85,400	380
1 1/4	32	2.6	3.9	106,600	474
1 3/8	35	3.4	5.0	129,800	577
1 1/2	38	3.9	5.8	155,400	691
1 5/8	42	4.5	6.7	180,800	804
1 3/4	44	5.4	8.1	206,600	919
1 7/8	48	6.5	9.7	236,000	1050
2	50	6.9	10.3	269,400	1198
2 1/8	54	7.4	11.0	304000.0	1352
2 1/4	57	8.9	13.2	342000.0	1521
2 3/8	60	10.0	14.9	380000.0	1690
2 1/2	64	10.7	15.9	422000.0	1877

WRI® DyPac 18

WRI® DyPac 18 series is a compacted rotation resistant rope construction consisting of an inner rope laid in one direction and an outer layer of strands laid in the opposite direction.

WRI Surelift® 35

WRI Surelift® 35 is a high performance, compacted low rotational rope that combines various multistrand designs to achieve excellent rotation resistance in high lift operations.

WRI® Ultra

WRI® brand rope without a plastic coating, Ultra is available in 6-strand design for drag position and 8-strand configuration for hoist position.

WRI Cushion® 34

A 34x19 construction provides improved flexibility and an approximate natural loop to rope ratio of 45-1. Multi-strand spin resistance and plastic enhancement allow for smooth in-service operation, significantly reduced rope torque and stretch, and less movement in the shaft whenthe rope is at full speed. Full plastic impregnation improves spin-resistance and eliminates internal cross cutting of the strands which is common to other multi-strand products, thereby extending service life and improving security. Galvanised wire and WRI's patented one-step impregnationand jacketing process, which provides a thick protectiveouter layer of plastic, prevents contaminants fromcorroding the rope and eliminates the need for costly in-field lubrication.

WRI Cushion Pac® Ultra

WRI® brand advanced plastic coated, 8 compacted strand construction

WRI® DyPac 34

DyPac strand enhancement of a 34x7 (LCD) construction provides additional performance, an increase in strength of approximately 15%, reduced sheave and drum wear, and significantly enhanced drum spooling. As a result, operating depths can be extended up to approximately 6000 ft. (1830 m).

WRI® DyPac 6

WRI® DyPac 6 is a high performance compacted single layer rope construction for various cranes and industrial applications.

WRI Power-Loc® HLC

WRI Power-Loc® HLC guide and rubbing ropes have five decades of proven track record. A specially designed half-locked coil construction provides excellent rotation resistance, superior wear properties and minimal movement in the shaft when compared to other rope constructions. Locked coil rope guides provide a cost-effective alternative to rigid wood or metal guides by allowing for reduced shaft sizes and structures, improved air displacement on moving conveyances and minimized damage and wear caused by vibration.

WRI® PS 3410