Bridon®

BriFill

Bridon® BriFill is produced by totally encapsulating a completed rope with a synthetic material. The material is injected internally into the rope and leaves a minimal thickness of material on the external surface.

Looking for a quote or more info?

Applications

Steel works blast furnace skips

Advantages

Crush resistant
Increased fatigue performance
Reduced rope stretch

Downloads

Bridon® Cranes and Industrial Brochure

Features

Compaction -

Core / Construction IWRC / Fully plasticated

Steel Grades 1470, 1570, 1670, 1770, 1960, 2060, 2160 or 2260

Lay type Langs lay or Regular lay

Lay Direction RH or LH

Finish Bright or Galvanised

Bridon® BriFill specification

^{Note for more detailed information please download the brochure above.}

Tables

Diameter Nominal length
mass Minimum Breaking Force
IP/1770 Minimum Breaking Force
EIP/1960 Minimum Breaking Force
EEIP/2160
mm inch kg/m lb/ft kN Tons
(short) Tonnes
(metric) kN Tons
(short) Tonnes
(metric) kN Tons
(short) Tonnes
(metric)
5/8 1.02 0.688 161 18.1 16.4 183 20.6 18.7 202 22.7 20.6
16.0 1.02 0.688 161 18.1 16.4 183 20.6 18.7 202 22.7 20.6
18.0 1.30 0.871 204 22.9 20.8 226 25.4 23.0 249 28.0 25.4
19.0 1.45 0.975 228 25.6 23.2 262 29.4 26.7 288 32.4 29.4
3/4 1.45 0.975 228 25.6 23.2 262 29.4 26.7 288 32.4 29.4
20.0 1.60 1.08 252 28.3 25.7 279 31.4 28.4 308 34.6 31.4
22.0 1.98 1.33 308 34.6 31.4 354 39.8 36.1 390 43.8 39.8
7/8 1.98 1.33 308 34.6 31.4 354 39.8 36.1 390 43.8 39.7
24.0 2.30 1.55 363 40.8 37.0 402 45.2 41.0 443 49.8 45.2
1 2.58 1.73 399 44.9 40.7 460 51.7 46.9 506 56.9 51.6
26.0 2.70 1.82 426 47.9 43.4 472 53.1 48.1 520 58.5 53.0
28.0 3.14 2.11 494 55.5 50.4 547 61.5 55.8 603 67.8 61.5
1 1/8 3.27 2.19 503 56.5 51.3 578 65.0 59.0 636 71.5 64.9
1 1/4 4.10 2.75 645 72.5 65.8 715 80.4 72.9 787 88.5 80.3
32.0 4.10 2.75 645 72.5 65.8 715 80.4 72.9 787 88.5 80.3
1 3/8 4.88 3.28 743 83.5 75.7 854 96.0 87.1 943 106 96.2
36.0 5.18 3.48 817 91.8 83.3 904 102 92.2 997 112 102
38.0 5.81 3.90 910 102 92.8 1010 114 103 1110 125 113
1 1/2 5.81 3.90 910 102 92.8 1010 114 103 1110 125 113
40.0 6.40 4.30 1010 114 103 1120 126 114 1230 138 125
1 5/8 6.81 4.58 1020 115 104 1170 132 119 1300 146 133
44.0 7.90 5.31 1220 137 124 1360 153 139 1500 169 153
1 3/4 7.90 5.31 1220 137 124 1360 153 139 1500 169 153
1 7/8 9.22 6.19 1450 163 148 1610 181 164 1770 199 180
48.0 9.22 6.19 1450 163 148 1610 181 164 1770 199 180

Diameter	Nominal length mass	Minimum Breaking Force IP/1770	Minimum Breaking Force EIP/1960	Minimum Breaking Force EEIP/2160
mm	inch	kg/m	lb/ft	kN	Tons (short)	Tonnes (metric)	kN	Tons (short)	Tonnes (metric)	kN	Tons (short)	Tonnes (metric)
	5/8	1.02	0.688	161	18.1	16.4	183	20.6	18.7	202	22.7	20.6
16.0		1.02	0.688	161	18.1	16.4	183	20.6	18.7	202	22.7	20.6
18.0		1.30	0.871	204	22.9	20.8	226	25.4	23.0	249	28.0	25.4
19.0		1.45	0.975	228	25.6	23.2	262	29.4	26.7	288	32.4	29.4
	3/4	1.45	0.975	228	25.6	23.2	262	29.4	26.7	288	32.4	29.4
20.0		1.60	1.08	252	28.3	25.7	279	31.4	28.4	308	34.6	31.4
22.0		1.98	1.33	308	34.6	31.4	354	39.8	36.1	390	43.8	39.8
	7/8	1.98	1.33	308	34.6	31.4	354	39.8	36.1	390	43.8	39.7
24.0		2.30	1.55	363	40.8	37.0	402	45.2	41.0	443	49.8	45.2
	1	2.58	1.73	399	44.9	40.7	460	51.7	46.9	506	56.9	51.6
26.0		2.70	1.82	426	47.9	43.4	472	53.1	48.1	520	58.5	53.0
28.0		3.14	2.11	494	55.5	50.4	547	61.5	55.8	603	67.8	61.5
	1 1/8	3.27	2.19	503	56.5	51.3	578	65.0	59.0	636	71.5	64.9
	1 1/4	4.10	2.75	645	72.5	65.8	715	80.4	72.9	787	88.5	80.3
32.0		4.10	2.75	645	72.5	65.8	715	80.4	72.9	787	88.5	80.3
	1 3/8	4.88	3.28	743	83.5	75.7	854	96.0	87.1	943	106	96.2
36.0		5.18	3.48	817	91.8	83.3	904	102	92.2	997	112	102
38.0		5.81	3.90	910	102	92.8	1010	114	103	1110	125	113
	1 1/2	5.81	3.90	910	102	92.8	1010	114	103	1110	125	113
40.0		6.40	4.30	1010	114	103	1120	126	114	1230	138	125
	1 5/8	6.81	4.58	1020	115	104	1170	132	119	1300	146	133
44.0		7.90	5.31	1220	137	124	1360	153	139	1500	169	153
	1 3/4	7.90	5.31	1220	137	124	1360	153	139	1500	169	153
	1 7/8	9.22	6.19	1450	163	148	1610	181	164	1770	199	180
48.0		9.22	6.19	1450	163	148	1610	181	164	1770	199	180

^{This table is for guidance purpose only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bekaert.}

WRI® DyPac 18

WRI® DyPac 18 series is a compacted rotation resistant rope construction consisting of an inner rope laid in one direction and an outer layer of strands laid in the opposite direction.

WRI® PS 620

In the crane and industrial industry, the WRI® PS 620 rope is a general purpose 6 strand galvanized rope produced with a steel core, fully lubricated during manufacture produced in accordance with EN 12385. In underground mining, specially selected wire tensile grades and 6 strand construction enhance wear resistance. Specially formulated lubrication enhances wear properties, increases rope performance, and reduces environmental impact due to fly-off and the calibrated cut lengths and custom pad eyes simplify installation and reduce down-time. Excellent value for less demanding applications.

WRI® PS 630

WRI® PS 630 is a general purpose 6 strand galvanized rope produced with a steel core, fully lubricated during manufacture producing in accordance with EN 12385.

Bridon® 6 Series

Bridon® 6 series is a range of general purpose 6 stranded galvanized ropes produced with a steel core, fully lubricated during manufacture producing in accordance with EN 12385.

Bridon® 8 Series

The 8 series is a range of general purpose 8 stranded bright & galvanised ropes produced with a steel core, fully lubricated during manufacture producing in accordance with EN 12385.

Bridon Dyform® DSC10 PI

Bridon Dyform® DSC 10 PI is a high performance compacted parallel laid rope construction with all the strands within the rope being spun/twisted together in one operation.

Bridon Dyform DSC8 MAX / MAX PI®

Bridon Dyform® DSC8 MAX / MAX PI is a high performance compacted double seale closed, parallel laid construction rope, with all the strands within the rope being spun/ twisted together in one operation. Ideal for high demanding boom hoisting operations. This type of rope can only be used where both ends are fixed and the load prevented from rotating.

Bridon Dyform® DSC8 / PI

Bridon Dyform® DSC8 / PI is a high performance compacted double seale closed, parallel laid construction rope, with all the strands within the rope being spun/ twisted together in one operation. Ideal for high demanding boom hoisting operations. This type of rope can only be used where both ends are fixed and the load prevented from rotating.

Can't find what you're looking for?