Bridon®

Swaged Tubing Line

Bridon® Swaged Tubing Line is a 6x31 rotary swaged rope used in onshore energy applications.

The swaging process increases durability and breaking strentgh & the 31 wire construction offers good bend fatigue properties.

Looking for a quote or more info?

Applications

Well Servicing Rigs

Advantages

Crush resistance
Excellent abrasion resistance
Wear resistant
Exceptional spooling

Downloads

Bridon® Onshore Oil & Gas brochure

Features

Compaction Swaged

Core IWRC

Steel Grades 1770, 1960 or 2160

Lay type Langs lay or Regular lay

Lay Direction RH or LH

Finish Bright or Galvanised

Bridon® Swaged Tubing Line specification

^{Note for more detailed information please download the brochure above.}

Diameter	Approx Mass WSC		Minimum Breaking Force
mm	lb/ft	kg/m	tons	kN
7/8	1.70	2.53	47.40	421.90
1	2.22	3.30	62.00	551.80
1 1/8	2.80	4.17	73.50	654.20

^{This table is for guidance purpose only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bekaert.}

Bridon® Tubing Line

Bridon® Tubing Line is a small-diameter pipe that is run into a well to serve as a conduit for the passage of oil and gas to the surface.

Bridon Constructex®

Bridon Constructex® is produced by rotary swaging a completed rope after manufacture. This swaging process reduces the rope diameter and reforms the profile of the outer strands, providing a rope that performs excellent in multilayer drum applications.

Bridon® 6 Series

Bridon® 6 series is a range of general purpose 6 stranded galvanized ropes produced with a steel core, fully lubricated during manufacture producing in accordance with EN 12385.

Bridon® 8 Series

The 8 series is a range of general purpose 8 stranded bright & galvanised ropes produced with a steel core, fully lubricated during manufacture producing in accordance with EN 12385.

Bridon® Swaged Tubing Line