Bridon®

Tubing Line

Bridon® Tubing Line is a small-diameter pipe that is run into a well to serve as a conduit for the passage of oil and gas to the surface.

Looking for a quote or more info?

Applications

Tubing Line

Advantages

Abrasion resistance
Excellent spooling
Wear resistance

Downloads

Bridon® Onshore Oil and Gas brochure

Features

Compaction -

Core IWRC

Steel Grades 1770, 1960 or 2160

Lay type Langs lay or Regular lay

Lay Direction RH or LH

Finish Bright or Galvanised

Bridon® Tubing Line specification

^{Note for more detailed information please download the brochure above.}

Diameter	Approx. Mass WSC		Min. Breaking Force
Diameter	Approx. Mass WSC		EIP
in	Ib/ft	kg/m	tons	kN
3/4	1.04	1.55	29.40	261.70
7/8	1.41	2.10	39.80	354.20
1	1.85	2.75	51.70	460.10
1 1/8	2.34	3.48	65.00	578.50

^{This table is for guidance purpose only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bekaert.}

Bridon® Tubing Line

Bridon® Tubing Line is a small-diameter pipe that is run into a well to serve as a conduit for the passage of oil and gas to the surface.

Bridon Constructex®

Bridon Constructex® is produced by rotary swaging a completed rope after manufacture. This swaging process reduces the rope diameter and reforms the profile of the outer strands, providing a rope that performs excellent in multilayer drum applications.

Bridon® 6 Series

Bridon® 6 series is a range of general purpose 6 stranded galvanized ropes produced with a steel core, fully lubricated during manufacture producing in accordance with EN 12385.

Bridon® 8 Series

The 8 series is a range of general purpose 8 stranded bright & galvanised ropes produced with a steel core, fully lubricated during manufacture producing in accordance with EN 12385.

Bridon® Swaged Tubing Line

Bridon® Swaged Tubing Line is a 6x31 rotary swaged rope used in onshore energy applications.

Bridon® Sand Line

Bridon® Sand Line's are installed on most drilling and work-over rigs, used when swabbing or bailing in the production tubing or well-bore tubulars. The Bridon® Sand Line is typically stored and operated on a winch drum and is part of the rig draw works.