Bridon®

Tiger 18M/PI

The Bridon Tiger® 18M balance rope with a two Layer construction over a WSC. This rotation resistant rope can be impregnated with plastic (PI) for a better corrosion resistance.

Looking for a quote or more info?

Applications

Parallel Drum Hoist
Blair Hoist

Advantages

Rotation resistant
Robust construction
PI - Corrosion resistance

Downloads

Bridon Tiger® 18M/PI Datasheet

Features

Compaction Dyform

Core IWRC, PI

Steel Grades 1770, 1960 or 2160

Lay type Langs lay or Regular lay

Lay Direction RH or LH

Finish Bright or Galvanised

Bridon Tiger® 18M/PI specification

^{Note for more detailed information please download the brochure above.}

Diameter	Approx. Mass	Calculated Aggregate Breaking Force			Calculated Minimum Breaking Force
Diameter	Approx. Mass	1570 N/mm²	1770 N/mm²	1960 N/mm²	1570 N/mm²	1770 N/mm²	1960 N/mm²
mm	kg/m	kN	kN	kN	kN	kN	kN
16	1.25	222	251	278	178	201	222
17	1.42	251	283	314	201	226	251
18	1.59	282	318	352	225	254	281
19	1.77	314	354	392	251	283	313
20	1.96	348	392	434	278	314	347
21	2.17	384	432	479	307	346	383
22	2.38	421	475	526	337	380	420
23	2.60	460	519	575	368	415	460
24	2.83	501	565	626	401	452	500
25	3.07	544	613	679	435	490	543
26	3.32	588	663	734	470	530	587
27	3.58	634	715	792	507	572	634
28	3.85	682	769	852	546	615	681
29	4.13	732	825	914	585	660	731
30	4.42	783	883	978	626	706	782
31	4.72	836	943	1040	669	754	835
32	5.03	891	1000	1110	713	804	890
33	5.35	948	1060	1180	758	855	947
34	5.68	1000	1130	1250	805	907	1000
35	6.02	1060	1200	1330	853	962	1060
36	6.37	1120	1270	1400	902	1010	1120
37	6.73	1190	1340	1480	953	1070	1190
38	7.10	1250	1410	1560	1000	1130	1250
39	7.48	1320	1490	1650	1050	1190	1320
40	7.90	1380	1560	1730	1110	1250	1380
41	8.30	1450	1640	1820	1160	1310	1450
42	8.72	1530	1720	1910	1220	1380	1520
43	9.14	1600	1800	2000	1280	1440	1600
44	9.57	1670	1890	2090	1340	1510	1670
45	10.00	1750	1980	2190	1400	1580	1750
46	10.40	1830	2060	2290	1460	1650	1830
47	10.90	1910	2160	2390	1530	1720	1910
48	11.30	1990	2250	2490	1590	1800	1990
49	11.80	2080	2340	2600	1660	1870	2080
50	12.30	2160	2440	2700	1730	1950	2160
51	12.80	2250	2540	2810	1800	2030	2250
52	13.30	2340	2640	2920	1870	2110	2340
53	13.80	2430	2740	3040	1940	2190	2430
54	14.40	2530	2850	3150	2020	2280	2520

^{This table is for guidance purpose only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bekaert.}

Bridon Tiger Dyform® 18M / 18M PI

Bridon Tiger Dyform® 18M Blair winder rope with a two layer construction over a WSC. This rotation resistant rope can be impregnated with plastic (PI) for a better corrosion resistance. The dyformed strands are giving better contact on the lining and the sheaves.

Bridon Tiger® Full Lock Guide Ropes

Bridon Tiger® Full Lock Guide Ropes are designed to a specific mining sectors. Maximum breaking load for guide rope application incorporated with good resistance to wear and abrasion.

WRI® PS 1810

A resilient 18x7 IWRC construction and wire tensile ranging from 1770 MPa (115 Long Tons/In2) to 2000 MPa(130 Long Tons/ In2) provide the necessary strength and reliability to operate up to depths of approximately 2000 ft.(610 m). A specialized Line Contact Design (LCD) improves performance and reduces internal cross cutting damage, common to other multi-strand products. By combining outer langs lay strands with inner regular lay strands, the underside of the outer strand wires run in the same direction as the wires of the supporting layer.

WRI Power-Loc® FLC

WRI Power-Loc® FLC is most effective when installed with a D/d ratio greater than 100-1. Exclusive manufacturing techniques provide superior rotation resistance and virtually eliminate the natural torque and rotation common to round or flattened triangular strand ropes

WRI® DyPac 34

DyPac strand enhancement of a 34x7 (LCD) construction provides additional performance, an increase in strength of approximately 15%, reduced sheave and drum wear, and significantly enhanced drum spooling. As a result, operating depths can be extended up to approximately 6000 ft. (1830 m).

WRI® PS 620

In the crane and industrial industry, the WRI® PS 620 rope is a general purpose 6 strand galvanized rope produced with a steel core, fully lubricated during manufacture produced in accordance with EN 12385. In underground mining, specially selected wire tensile grades and 6 strand construction enhance wear resistance. Specially formulated lubrication enhances wear properties, increases rope performance, and reduces environmental impact due to fly-off and the calibrated cut lengths and custom pad eyes simplify installation and reduce down-time. Excellent value for less demanding applications.

Bridon Tiger® 6R Bristar®

Bridon Tiger® 6R Bristar® is the most common used rope on friction winders with reliable performance, advanced diameter stability and lifetime with a Bristar® core.

Bridon Tiger Dyform® 34LR MAX

Roller compacted Bridon Tiger Dyform® 34LR MAX offering the highest strength with excellent spooling properties on multi-layer drums.